Forums » Support

Connect your printer to a wireless network through WPS

    • 1 posts
    October 1, 2020 7:45 AM CDT
    <p>WPS or Wi-Fi Protected Setup is a feature that let a Device <a href="https://printers-setup.us/blog/epson-wireless-printer-setup">connect to a wireless network through Wi-Fi</a></p>
    <p> </p>
    <ul>
    <li>Check your router or access point for the WPS button.</li>
    <li>If it's not there check for any WPS enabling option in your router’s software.</li>
    <li>Disconnect the LAN cable connected to your printer.</li>
    <li>Push the WPS button on your router to power it on.</li>
    <li>Now on your Epson printer press and hold the Wi-Fi button.</li>
    <li>The printer will search for your wireless network.</li>
    <li>When the connection is being established, the network status LED will blink red and green.</li>
    <li>When the printer gets connected, then the network status LED will turn green.</li>
    </ul>
    <p> </p>
    <p>Source - https://printers-setup.us/blog/epson-wireless-printer-setup</p>